TM 3-1040-280-20&P
2-5.
INSTALLATION INSTRUCTIONS (CONT).
e.
Air Compressor Assembly and Mounting Plate.
INSTALLATION
WARNING
Air compressor and mounting plate are heavy. To prevent personnel injury, use two people to lift.
a.
Attach air compressor assembly (1) to mounting plate (2) with 11 screws (3), 22 washers (4), and 11 nuts (5).
b.
Remove and retain four screws (6), eight washers (7) and four nuts (8) from generator support angles (9).
Position mounting plate (2) over mounting holes in generator support angles (9) with air compressor tank to front of
vehicle. Secure mounting plate to generator support angles with four screws (6), eight washers (7) and four nuts (8)
retained from the generator support angles (9).
Change 1 2-6
