TM 11-6115-21 8-24P
quantity of the item used in the breakout shown on the
illustration figure, which is prepared for a functional
condemn and dispose at the level indicated in
group, subfunctional group, or an assembly.
H Reparable item.
4. Special Information
reparable, condemn and dispose at the general
The following publication pertains to the G-43/G and
G-77/G and their components:
c. National Stock Number.
National stock number assigned to the item and will be
used for requisitioning purposes.
5. How to Locate Repair Parts
d. Part Number. Indicates the primary number
a. When National stock number or part number
used by the manufacturer (individual, company, firm,
corporation, or Government activity), which controls
(1) First. Using the table of contents,
the design and characteristics of the item by means of
determine the functional group within which the item
its engineering drawings, specifications, standards, and
belongs. This is necessary since illustrations are
inspection requirements to identify an item or range of
prepared for functional groups and listings are divided
into the same groups.
(2) Second. Find the illustration covering
the functional group to which the item belongs.
When a stock numbered item is
Identify the item on the
requisitioned, the repair part received may
illustration and note the illustration figure and item
have a different part number than the part
number of the item.
(4) Fourth. Using the Repair Parts Listing,
e. Federal Supply Code for Manufacturer
find the figure and item number noted on the
(FSCM). The FSCM is a 5-digit numeric code listed in
SB 708-42 which is used to identify the manufacturer,
b. When National stock number or part number
distributor, or Government agency, etc.
f. Description. Indicates the Federal item name
(1) First. Using the Index of National Stock
and, if required, a minimum description to identify the
Numbers and Part Numbers, find the pertinent National
stock number or part number. This index is in NIIN
g. Unit of Measure (U/M).
sequence followed by a list of part numbers in
standard of the basic quantity of the listed item as used
alphanumeric sequence, cross-referenced to the
in performing the actual maintenance function. This
illustration figure number and item number.
measure is expressed by a two-character alphabetical
(2) Second After finding the figure and item
abbreviation (e.g., ea. in, pr, etc.). When the unit of
number, locate the figure and item number in the repair
measure differs from the unit of issue, the lowest unit
of issue that will satisfy the required units of measure
will be requisitioned.
h. Quantity Incorporated in Unit. Indicates the