TB 9-6115-642-13
34. Install heater brace (3), Figure 5-8, by using heater brace as a template for location and mark. Drill hole, 5/16" and
mount to the inside top of the generator housing using screw (5), flat washer (6), lock washer (7), and nut (8).
35. Install thermal sleeving (16) over exhaust hose (15) and attach one end of exhaust hose (15), to heater (2), using
clamp (4). Before attaching clamp, remove the screw from the clamp and insert clamp screw through heater
brace (3) and then into the clamp (4).
