TB 9-6115-641-13
Item
Interval
Location
Procedure
Not Fully Mission
No.
Item to Check/Service
Capable if:
NOTE
Refer Generator TM 9-6115-641-10.
1
Before
VISUAL INSPECTION
Damage that renders
a. Check for damage.
Heater assembly
equipment unsafe.
Heater control unit
Class III coolant or any
b. Check on, around and under
class fuel leak is
equipment for fuel, oil or
Fuel and coolant lines
detected.
coolant leaks.
2
Before
Generator is low on
Check for sufficient fuel supply.
GENERATOR FUEL TANK
fuel.
3
Before
WARNING
GENERATOR COOLING
Generator is low on
SYSTEM
Generator cooling system
coolant.
operates at high temperatures.
Personal injury or death from burns or
scalding can result from contact with high
pressure steam and/or liquid.
Inspect for loose, damaged or missing
Class III leaks or
RADIATOR
parts.
missing radiator cap.
Inspect for leaks, cracks or missing parts.
Class III leaks or
HOSES
missing clamps or
hoses.
4
Before
Inspect wiring for burned or frayed
Wiring is loose or
HEATER WIRING
insulation or loose terminals.
burned.
CONNECTIONS
5
During
Check that indicator light is on when
HEATER CONTROL
heater is operating. Check Heater
SWITCH AND LIGHT
Function Code Plate.
6
After
Repeat procedures for items 1 - 5.
ITEMS 1 - 5
