TM 9-6115-730-24
0026
DISASSEMBLY
Right Front Door Assembly
1. Remove twelve screws (Figure 1, Item 15), washers (Figure 1, Item 16), lockwashers (Figure 1, Item 17), and
duct (Figure 1, Item 18).
2. Remove four nuts (Figure 1, Item 10), screws (Figure 1, Item 11), door holding bracket (Figure 1, Item 12),
door holding rod (Figure 1, Item 13), and holding rod bracket (Figure 1, Item 14).
3. Remove thirteen locknuts (Figure 1, Item 7), screws (Figure 1, Item 8), and hinge (Figure 1, Item 9) from right
front door assembly (Figure 1, Item 3).
4. Remove six foam damping sheets as required.
END OF TASK
ASSEMBLY
Right Front Door Assembly
1. Install hinge (Figure 1, Item 9) and secure with thirteen screws (Figure 1, Item 8) and locknuts (Figure 1,
Item 7).
2. Install seal as required.
3. If necessary, use old foam damping sheets as templates to cut new foam damping sheets.
4. Install six damping sheets.
5. Install duct (Figure 1, Item 18) on right front door assembly (Figure 1, Item 3), and secure with eighteen
lockwashers (Figure 1, Item 17), washers (Figure 1, Item 16), and screws (Figure 1, Item 15).
6. Install holding rod bracket (Figure 1, Item 14), door holding rod (Figure 1, Item 13), door holding bracket
(Figure 1, Item 12), and secure with four screws (Figure 1, Item 11) and nuts (Figure 1, Item 10).
END OF TASK
INSTALLATION
Right Front Door Assembly
1. Install right front door assembly (Figure 1, Item 3) and secure with thirteen lockwashers (Figure 1, Item 6),
washers (Figure 1, Item 5), and screws (Figure 1, Item 4).
2. Close right front doors (Figure 1, Item 3) and (Figure 1, Item 2) and secure by rotating and closing two latches
(Figure 1, Item 1).
END OF TASK
0026-3