ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
(3) Position washer, spring, and spring seat over valve stem.
(4) Using valve spring compressor, compress valve spring and install spring lock.
(5) Repeat steps (1) through (4) to install exhaust valve in cylinder head.
d. Adjustment.
5-10. Valve Adjustment
FUEL INJECTION PUMP.
WARNING
The fuels in this generator set are flammable. Do not smoke or use open
flames when performing maintenance. Do not service or drain the fuel
system while open flames are present. Flames and explosion could result
in severe personal injury or death. Use a container or cloth to catch any
excess fuel to prevent spilling over engine components. Be sure to properly
dispose of diesel fuel and diesel fuel soaked cloths.
a. Removal.
(2) Close fuel shutoff valve at fuel filter assembly.
(3) Loosen hose clamp and disconnect suction fuel line from fuel injection pump (Figure 5-
(4) Disconnect pressure fuel line from fuel injection pump and from fuel injector. Move line
aside.
(5) Remove nuts and pull fuel injection pump straight out of engine.