TM 9-6115-669-13&P
d.
The following lamps (figure 2-21) indicate shutdown due to fault/overload in the power supply
to the loads:
OVERLOAD-J1-RS1 (1)
OVERLOAD-J2-RS2 (2)
OVERLOAD-J3-RS3 (3)
OVERLOAD-J4-ECS (4)
The OVERLOAD lamp (4, figure 2-20) indicates shutdown due to a generator set fault/overload.
To reset after remedying an OVERLOAD malfunction:
After remedying a load malfunction, press OVERLOAD RESET pushbutton switch (5, figure
2-21).
After remedying a generator malfunction, press OVERLOAD illuminated pushbutton switch
(4, figure 2-20).
Figure 2-21 Fault Signals on EPP III PDU Control Panel.
2 - 5 5