TM 9-6150-228-13&P
1.1 SCOPE.
1.1.1 Type of Manual. Operator, Unit, and Direct Support Maintenance Manual (including Repair Parts and Special
Tools List).
1.1.2. Model Number and Equipment Name.
1.1.2.1
Model number for this end item is PEU-155/E.
1.1.2.2
Part number for this end item is M29183/19.
1.1.2.3
Complete nomenclature for this end item is Power Distribution Panel.
1.1.3
Purpose of Equipment. The purpose of this equipment is to provide the user a means of supplying power to
several points, using a single power supply or two power supplies when continuous operation is required.
1.2 MAINTENANCE FORMS AND PROCEDURES. Department of the Army forms and procedures used for equipment
maintenance will be those prescribed by DA PAM 738-750, The Army Maintenance Management System(TAMMS).
1.3 CORROSION PREVENTION AND CONTROL (CPC).
1.3.1
Corrosion Prevention and Control (CPC) of Army materiel is a continuing concern. It is important that any
corrosion problems with this item be reported so that the problem can be corrected and improvements can be made to
prevent the problem in future items.
1.3.2
While corrosion is typically associated with rusting of metals, it can also include deterioration of other materials,
such as rubber and plastic. Unusual cracking, softening, swelling, or breaking of these materials may be a corrosion
problem.
1.3.3
If a corrosion problem is identified, it can be reported using Standard Form 368 (Product Quality Deficiency
Report). Use of keywords such as corrosion, rust, deterioration, or cracking will ensure that the information is identified
as a CPC problem. The form should, be submitted to the address specified in DA PAM 738-750.
1.4 DESTRUCTION OF ARMY MATERIELTO PREVENT ENEMY USE. For general destruction procedures for this
equipment refer to TM 750-244-2 and -3, Procedures for Destruction of Equipment to Prevent Enemy Use (US Army
Mobility Equipment Command).
1.5 REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR). If your power distribution panel needs
improvement, let us know. Send us an EIR. You, the user, are the only one who can tell us what you don't like about
your equipment. Let us know why you don't like the design. Put it on an SF 368 (Product Quality Deficiency Report).
Mail it to us at: Commander, US Army Aviation and Troop Command, 4300 Goodfellow Blvd., St Louis, MO 63120-1798,
ATTN: AMSAT-I-MDO. We will send you a reply.
1.6 OUAUTY ASSURANCE/QUALITY CONTROL (QA/QC). Quality Assurance/Quality Control Procedures used will be
those enforced by the local Commanding Officer.
1.7 LIST OF ABBREVIATIONS. Abbreviation used in this manual are listed in the glossary at the end of this manual.
Explanation of terms used in this manual are included in the glossary.
1-2
