Figure 2-6
Figure 2-5
Figure 2-5
Figure 2-6
Figure 2-7
TM 9-6150-226-13
A/P is in series between the bus bars and a 20- amp output connector. These circuit breakers prevent output
power to the connectors from exceeding a current of 20 amps per phase (2.4 kW maximum load). These circuit
breakers also allow the operator to turn off to the load circuits.
indication) for the 20 AFG circuit breakers. The M40 A/P does not have a ground fault circuit.
A/P are connected between neutral and each phase. When electrical power is being supplied to the distribution
.
center, the lights will illuminate.
2-4. M60 DISE DISTRIBUTION CENTER AND M60 A/P PDISE DISTRIBUTION CENTER.
M60 and (1, Figure 2-6) for M60 A/P is in series between the 60-amp input connector and the bus bars. This
circuit breaker prevents input power to the distribution center from exceeding a total current of 60 amps (7.2 kW
maximum load). This circuit breaker allows the operator to turn off power to all output circuit breakers.
2-12
Change 1
