TM 9-6150-226-13
NOTES:
1. ALL DIMENSIONS ARE IN INCHES, WITH THE METRIC EQUIVALENT IN PARENTHESES.
2. CUT AND REMOVE CABLE AND WIRE INSULATION FROM CABLE ENDS AS INDICATED.
3. INSTALL P1 AND P2 CONNECTORS ON PROPER CABLE ENDS SO COLORS AND PINS/SOCKETS
MATCH AS FOLLOWS:
4.
5.
6.
COLOR
FROM
TO
BLACK
P1–A
P2-A
WHITE
P1-B
P2-B
GREEN
P1–C
P2-C
VERIFY ELECTRICAL CONTINUITY FOR EACH “FROM-TO PATH WITH AN OHMMETER.
CRIMP PINS/SOCKETS TO CABLE WIRES.
ASSEMBLE P1 AND P2 CONNECTORS SO KEYS/KEYWAYS AND PINS/SOCKETS ALINE AS
INDICATED.
7. MARK SLEEVES IN ACCORDANCE WITH MIL-M-60903 AS FOLLOWS:
97403-13226E7032–4
120 VAC
20 AMP
FIGURE F-4. 20-amp, 3.5-ft (1.07m) extension cable. (sheet 3 of 3)
F-17
