TM 9-6115-729-24
0022
ASSEMBLY
1. If necessary, use old foam damping sections as templates to cut new foam damping sections.
2. Install six foam damping sections.
3. Install duct (Figure 1, Item 14) and door holding rod (Figure 1, Item 13), and secure with twelve washers
(Figure 1, Item 12), lockwashers (Figure 1, Item 11), and screws (Figure 1, Item 10).
4. Install hinge (Figure 1, Item 9) and secure with eight screws (Figure 1, Item 8) and locknuts (Figure 1, Item 7).
END OF TASK
INSTALLATION
1. Install left rear door assembly and hinge (Figure 1, Item 3) and secure with eight lockwashers (Figure 1, Item
6), washers (Figure 1, Item 5), and screws (Figure 1, Item 4).
2. Close left rear door assembly (3) and left rear door assembly (latch) (Figure 1, Item 2) and secure by rotating
two latches (Figure 1, Item 1).
END OF TASK
END OF WORK PACKAGE
0022-3/4 blank
