TM 9-6115-729-24
0011
TROUBLESHOOTING FAILURES WITHOUT FAULT CODES - Continued
SYMPTOM
37.
MALFUNCTION
CORRECTIVE ACTION
STEP 1.
On EMCP set ENGINE CONTROL switch to OFF/RESET. Set Battery
Disconnect Switch to OFF. Set DEAD CRANK SWITCH to OFF.
STEP 2.
Inspect crankcase ventilation filter and replace if necessary (WP 0069).
STEP 3.
Verify the problem has been resolved.
MALFUNCTION
Turbocharger Seals Failure.
CORRECTIVE ACTION
STEP 1.
On EMCP set ENGINE CONTROL switch to OFF/RESET. Set Battery
Disconnect Switch to OFF. Set DEAD CRANK SWITCH to OFF.
STEP 2.
STEP 3.
Verify the problem has been resolved.
MALFUNCTION
Worn or Damaged Valve Guide Seals.
CORRECTIVE ACTION
STEP 1.
On EMCP set ENGINE CONTROL switch to OFF/RESET. Set Battery
Disconnect Switch to OFF. Set DEAD CRANK SWITCH to OFF.
STEP 2.
Inspect valve guide seals for wear or damage. Replace cylinder head (WP 0116).
STEP 3.
Verify the problem has been resolved.
MALFUNCTION
Internal Engine Oil Leakage/Excessive Blow-by.
CORRECTIVE ACTION
STEP 1.
Internal engine oil leakage is suspected. Replace engine (WP 0098).
STEP 2.
Verify the problem has been resolved.
0011-50