TM 9-6115-729-24
0010
TROUBLESHOOTING USING DVR FAULT CODES - Continued
SYMPTOM
1.
Code 000 No Fault Present
MALFUNCTION
None
CORRECTIVE ACTION
None
NOTE
This fault signifies that the internal memory failed during a read operation.
SYMPTOM
2.
Code 601
MALFUNCTION
Internal Memory Failure
CORRECTIVE ACTION
STEP 1.
Set the ENGINE CONTROL switch to OFF/RESET to reset the fault (WP 0006).
STEP 2.
Set Battery Disconnect Switch to ON. Set DEAD CRANK Switch to NORMAL.
Set the ENGINE CONTROL switch to COOL DOWN/ STOP.
STEP 3.
Check all parameters between :01 and :38 (WP 0085).
a. If fault reoccurs periodically, may be indication of failing battery. Check for
related failures and correct. Check for battery error codes on GSC. Codes
displaying FMI 04 indicate low voltage. Check batteries (WP 0049).
b. If the problem has not been resolved, check for additional DVR fault codes.
Correct any fault codes. Verify the problem has been resolved.
c.
If the problem has not been resolved, memory is failing in the DVR. Replace
the DVR (WP 0041).
STEP 4.
Verify the problem is resolved.
0010-2
