TM 9-6115-729-24
0009
TROUBLESHOOTING USING GSC FAULT CODES - Continued
SYMPTOM
14.
CID 96 E FMI 01
MALFUNCTION
High Fuel pressure Warning.
FMI 01 - Data is Valid but Data is Below Normal Operating Range.
Event Code. Indicates that sensor detects a fuel system backup to cause high pressure warning.
CORRECTIVE ACTION
STEP 1.
Set Battery Disconnect Switch to ON. Set DEAD CRANK SWITCH to NORMAL.
On EMCP turn the ENGINE CONTROL switch to COOL DOWN/STOP.
STEP 2.
Press ALARM CODES on GSC keypad.
STEP 3.
Check for associated alarm code and fault code and troubleshoot (WP 0008
and/or WP 0009).
STEP 4.
If no fault code, inspect fuel filter and fuel/water separator per PMCS (WP 0016)
and perform service as required.
SYMPTOM
15.
CID 97 E FMI 01
MALFUNCTION
Derate Overridden.
FMI 01 - Data is Valid but Data is Below Normal Operating Range.
Event Code. Engine derate overridden. Verify presence of fault.
CORRECTIVE ACTION
STEP 1.
Set Battery Disconnect Switch to ON. Set DEAD CRANK SWITCH to NORMAL.
On EMCP turn the ENGINE CONTROL switch to COOL DOWN/STOP.
STEP 2.
Press ALARM CODES on GSC keypad.
STEP 3.
Check for logged fault code, troubleshoot, and correct (WP 0008 and/or
STEP 4.
Verify the problem is resolved.
0009-11
