TM 9-6115-729-24
0009
TROUBLESHOOTING USING GSC FAULT CODES - Continued
SYMPTOM
6.
CID 1 E FMI 06
CID 6 E FMI 11
MALFUNCTION
Cylinder 6.
FMI 06 - Injector Current Fault.
FMI 11 - Failure Mode is not Identifiable (Mechanical Failure).
CORRECTIVE ACTION
Perform steps in SYMPTOM 1.
SYMPTOM
7.
CID 9 E FMI 02
MALFUNCTION
High Altitude Degradation.
FMI 02 - Erratic, Intermittent, or Incorrect Signal.
Event Code. Engine power lowered because of altitude. Higher the altitude, the lower the air density.
Clean dense air is needed for efficient combustion.
CORRECTIVE ACTION
NOTE
Pins 4 (+) and 5 (-) of ECM connector J2 is an 8 Vdc supply. This is supplied by the ECM for an
accelerator pedal control when this engine is used in a truck. This supply is not used on the
generator set.
SYMPTOM (Not Applicable)
8.
CID 41 FMI 02
CID 41 FMI 03
CID 41 FMI 04
MALFUNCTION
8 Volt Power Supply not Normal.
FMI 02 - Erratic, Intermittent, or Incorrect Signal.
FMI 03 - Voltage Above Normal.
FMI 04 - Voltage Below Normal.
0009-4
