ARMY TM 9-6115-672-14
AIR FORCE TO 35C2-3-444-32
MARINE CORPS TM 09244A/09245A-14
2-27
c. Open Load Terminal access door (Figure 1-2).
d. Using insulated wrench (1, Figure 2-7), loosen terminal nuts (2) on terminals selected in step b.
e. Insert load cables through load terminal access boot and into terminal studs (3). Tighten terminal nuts
(2).
f.
Secure insulated wrench (1) in bracket beside output load terminal board, and close terminal board
access door.
2.10
INITIAL ADJUSTMENTS, CHECKS, AND SELF-TEST.
2.10.1 Preparation. Perform all BEFORE (B) PMCS. Refer to Table 2-5.
2.10.2 Initial Adjustments and Checks.
a. Open left side engine compartment doors (Figure 1-3).
b. Place DEAD CRANK switch (1, Figure 2-8) in NORMAL position.
FIGURE 2-7. INSTALLATION OF LOAD CABLES
