ARMY TM 9-6115-672-14
AIR FORCE TO 35C2-3-444-32
MARINE CORPS TM 09244A/09245A-14
2-4
TABLE 2-1. DCS CONTROLS AND INDICATORS (continued)
KEY
CONTROL OR INDICATOR
FUNCTION
20
Keypad Left Arrow Pushbutton
Moves cursor on CIM display screen to the left until released.
21
DC CONTROL POWER Fuse
Provides overcurrent protection for DC circuits.
22
FREQUENCY SELECT Switch
(MEP-806B only)
Allows selection of 50 Hz or 60 Hz.
23
REACTIVE CURRENT ADJUST
rheostat
Adjusts voltage droop when two generator sets are operated in
parallel.
24
VOLTAGE SCALE Switch
Reports configuration of output voltage connection selected on
voltage reconnection terminal board.
2.3
COMPUTER INTERFACE MODULE (CIM) DISPLAY SCREEN CONTROLS AND INDICATORS.
The Computer Interface Module (CIM) Display Screen displays most of the indicators for the generator set.
Figure 2-2 shows the CIM display screen layout. Table 2-2 describes each control and indicator. Table 2-3
describes faults that may be displayed in the FAULT INDICATOR section of the CIM display screen and
related operator messages that may be displayed in the MESSAGES section.
