ARMY TM 9-6115-672-14
AIR FORCE TO 35C2-3-444-32
MARINE CORPS TM 09244A/09245A-14
5-59
(3)
Remove generator rotor assembly, paragraph 5.10.6.
(4)
Install generator rotor assembly, paragraph 5.10.6.
(5)
Install generator assembly, paragraph, 5.10.1.
5.11
MAINTENANCE OF SKID BASE.
__________
WARNING
When disconnecting or removing batteries, disconnect the negative lead
that connects directly to the grounding stud first. Disconnect the negative
end of the interconnection cable next. When installing batteries, reverse the
connection sequence. Failure to comply can cause serious personal injury.
5.11.1 Skid Base.
a. Inspection.
Inspect skid base for obvious signs of damage such as corrosion and dents.
a. Removal.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Remove engine and generator assembly, paragraph 5.4.2.
(3)
Remove fuel tank, paragraph 5.7.1.
(4)
Remove nuts (1, Figure 5-13), lockwashers (2), bolts (3), washers (4), and forklift guides (5)
from skid base.
(5)
Remove cable grommets (6 and 7) from skid base.
b. Repair. Repair of skid base will be limited to corrosion control and spot welding minor cracks. If
major structural damage has occurred, replace skid base. Repair surfaces in accordance with TM-43-
0139.
c. Installation.
(1)
Install cable grommets (7 and 6, Figure 5-13) in skid base.
(2)
Install forklift guides (5), washers (4), bolts (3), lockwashers (2), and nuts (1) on skid base.
(3)
Install fuel tank, paragraph 5.7.1.
(4)
Install engine and generator assembly, paragraph 5.4.2.
