ARMY TM 9-6115-670-14&P
6-38
c. Test camshaft journal oil clearance:
(1) Measure camshaft journal OD with outside micrometer caliper. It should be between
1.29662 and 1.29725 in. (32.934 and 32.950 mm).
(2) Measure cylinder block bore ID for camshaft journal with inside micrometer caliper. It
should be between 1.29921 and 1.30020 in. (33 and 33.025 mm).
(3) Calculate oil clearance. It should be between 0.00197 and 0.00358 in. (0.050 and 0.091
mm). If oil clearance exceeds allowable limit, replace the camshaft.
Figure 6-13. Camshaft (Sheet 2 of 4)
