TM 9-6115-670-14&P
4-106
REPLACE
a.
Remove one bolt and lock washers (1) and two bolts (7) securing muffler (6) to muffler bracket (2),
remove three bolts and washers (3, Figure 4-28) securing muffler (6) to muffler brace (4). Remove
muffler (6) and muffler gasket (5).
b. Remove hose clamp loops (8) and exhaust pipe insulating wrap from muffler exhaust pipe. Discard
muffler and gasket.
c. Install new muffler (6) and muffler gasket (5) to muffler brace (4) and secure with three bolts and
washers (3).
d. Install exhaust pipe insulating wrap on muffler (6) and secure with loop clamps (8) on both ends.
e. Secure muffler (6) to muffler bracket (2) with one bolt and lock washers (1) and two bolts (7).
f. Install muffler wrap (para 4.42.).
g. Install bracket on muffler wrap.
Figure 4-28. Muffler (JTACS and WIN-T)
