ARMY TM 9-6115-670-14&P
4-34
4.15. OIL FILTER.
This task covers:
Replace
INITIAL
SETUP
Tools
None
Equipment Conditions
MASTER ON-OFF switch on APU Control Unit set to
OFF.
Materials/Parts
Oil Filter
Oil drained from engine crankcase (para 4.14.).
REPLACE
a. Unscrew oil filter (2, Figure 4-2) by turning counter clockwise.
b. Remove oil filter from oil cooler (1).
c. Lubricate gasket on new oil filter with engine oil.
d. Install new oil filter (2) on oil cooler (1) and hand tighten by turning clockwise (cw).
e. Replenish oil (para 3.6.).
CAUTION
Do not overtighten new oil filter. Overtightening
may damage oil filter gasket.
NOTE
Oil filter is located on the fuel pump side or SICPS
and WIN-T units. Oil filter is located on the
muffler side for JTACS unit.
