TM 9-6115-664-13&P
5-7. ENGINE/ALTERNATOR ASSEMBLY MAINTENANCE
WARNING
Engine and alternator assembly is heavy and awkward. Enlist the help of an
assistant when removing to prevent injury to personnel and damage to
components.
6. Attach lifting hoist to engine/alternator lift cable (18). Raise hoist to remove slack.
7. Lift rubber flap (19) from flywheel shroud (20) to gain access to mounting screw (23).
NOTE
Do not intermix mounting screws (23, 27). Screws (27) are longer.
8. Release alternator (21) from shock mounts (22) by removing two screws (23) and washers (24). Release engine (25)
from shock mounts (26) by removing two screws (27) and washers (28).
9. Carefully lift engine and alternator assembly up and out of enclosure. Place in an engine stand or on a flat work
surface for further maintenance.
10. If replacement of oil drain hose (51) is required, disconnect hose from bottom of engine by removing banjo bolt (52)
and spacers (53, 54).
11. Remove shock mounts (22, 26) from base of enclosure by removing eight screws (29), washers (30), and nuts (31).
12. If required, remove rubber flap (19) from flywheel shroud (20) by removing rivets (32).
5-10
