TM 9-6115-651-14&P
CHAPTER 3
OPERATOR/CREW MAINTENANCE INSTRUCTIONS
Section I. CONSUMABLE OPERATING AND MAINTENANCE SUPPLIES
3-1. Consumable Supplies. Consumable supplies used in the maintenance and operation of the power
unit are listed in Table 3-1.
Table 3-1. Consumable Operating and Maintenance Supplies.
(1)
(2)
(3)
(4)
(5)
(6)
Qty
Qty
required
required
Component
National
for initial
8 hours
application
stock number
Description
operation
operation
Notes
General
6850-00-664-5685
Solvent, Drycleaning, PD-680
1 quart
As required
Cleaning
Personnel
9150-00-186-6681
Oil, Lubricating, OE/HDO-30
1 quart
As required
Platform
9150-00-402-4478
Oil, Lubricating, OEA
1 quart
As required
Section Il. LUBRICATION INSTRUCTIONS
3-2. General. Detailed instructions for the lubrication of the major components of the power unit are contained
in the applicable Lubrication Orders (LO’s). Refer to DA Pam 25-30 to ensure the latest editions of the LO’s are
used.
3-3. Generator Lubrication. Refer to TM 5-6115-545-12 for generator set Lubrication Order.
3-4. Trailer Lubrication. There are no operator/crew lubrication requirernents for the power unit trailer.
Section Ill. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
NOTE
The PMCS chart in this section contains all necessary Operator/Crew preventive
maintenance checks and services for this equipment.
3-5. General. The preventive maintenance checks and services listed in Table 3-2 are grouped according to
stages of equipment operation or time intervals. Using the following as a guide, do the checks and services at the
intervals shown.
a. Before you operate, perform your before (B) PMCS. Observe all CAUTIONS and WARNINGS.
3-1
