TM 9-6115-650-14&P
CHAPTER 3
OPERATOR/CREW MAINTENANCE INSTRUCTIONS
Section I. CONSUMABLE OPERATING AND MAINTENANCE SUPPLIES
3-1. Consumable Supplies. Consumable supplies used in the maintenance and operation of the power
plant are listed in Table 3-1.
Table 3-1. Consumable Operating and Maintenance Supplies.
(1)
Component
application
General
Cleaning
Leg Prop
Assembly
Leg Prop
Assembly
(2)
National
stock number
6850-00-664-5685
9150-00-190-0904
9150-00-186-6681
9150-00-402-4478
(3)
Description
Solvent, Drycleaning, PD-680
Grease, Automotive and Artillery,
GAA
Oil, Lubricating, OE/HDO-30
Oil, Lubricating, OEA
(4)
Qty
required
for initial
operation
1 quart
1 pound
1 quart
1 quart
(5)
Qty
required
8 hours
operation
As required
As required
As required
As required
(6)
Notes
Section Il. LUBRICATION INSTRUCTIONS
3-2. General. Detailed instructions for the lubrication of the major components of the power plant are contained
in the applicable Lubrication Orders (LO’s). Refer to DA Pam 25-30 to ensure the latest editions of the LO’s are
used.
3-3. Generator Lubrication. Refer to TM 5-6115-585-12 for generator set Lubrication Order.
3-4. Trailer Lubrication. There are no operator/crew lubrication requirements for the power plant trailer.
However, the operator shall assist unit maintenance
Section Ill. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
NOTE
The PMCS chart in this section contains all necessary Operator/Crew preventive
maintenance checks and services for this equipment.
3-1
