TM 9-6115-648-14&P
b. Installation.
(1) Position fuel can bracket (4) on step (5).
(2) Insert four screws (1) down through bracket (4) and through step (5).
(3) Install one washer (3) and one self-locking nut (2) on each screw (1). Tighten hardware to secure
bracket (4).
4-18. Accessory Box Replacement. (See figure 4-6.) The accessory box is mounted to the trailer frame
at the curbside front step.
a. Removal.
(1) Remove three screws (1
(4) to trailer frame (5).
Figure 4-6. Accessory Box Replacement.
, figure 4-6), three flat washers (2), and three nuts (3) securing accessory box
(2) Slide accessory box (4) forward and off front step (6).
b. Installation.
(1) Position accessory box (4) on front trailer step (6) with narrow end between handbrake lever (7) and
trailer frame (5).
4-14
