TM 9-6115-647-14&P
Recoverability
Codes
Definition
D
Reparable item. When beyond lower level repair capability, return to depot. Condemnation
and disposal not authorized below depot level.
L
Reparable item. Repair, condemnation and disposal not authorized below depot/Specialized
Repair Activity level.
A
Item requires special handling or condemnation procedure because of specific reasons (i e ,
precious metal content, high-dollar value, critical materiel or hazardous material). Refer to
appropriate manuals/directives for specific instructions.
c.
National Stock Number (Column 4) . Indicates the National Stock Number assigned to the item
and will be used for requisitioning purposes.
d.
Description (Column 5) . Indicates the Federal item name and any additional descriptions of the
item required. The abbreviation "w/e" when used as a part of the nomenclature, indicates that the National
Stock Number includes all armament, equipment, accessories and repair parts issued with the item. A part
number or other reference number is followed by the applicable five digit Federal Supply Code for
Manufacturer in parentheses. If two reference numbers and Federal Supply Codes for Manufacturer are listed,
the first listing refers to the Department of Defense Drawing Number, the second listing refers to the actual part
manufacturer items that are included in kits and sets are listed below the name of the kit or set with the quantity
of each item in the kit or set indicated in the quantity incorporated in unit column.
e.
Unit of Measure (U/M) (Column 6) . Indicates the standard of the basic quantity of the listed item
as used in performing the actual maintenance function. This measure is expressed by a two-character
alphabetical abbreviation (e g, ea, in, pr etc ) . When the unit of measure differs from the unit of issue, the
lowest unit of issue that will satisfy the required units of measure will be requisitioned.
f.
Quantity Incorporated in Unit (Column 7) . Indicates the quantity of the item used in the assembly
group. A "V" appearing in this column in lieu of a quantity indicates that a definite quantity cannot be indicated
(e g , shims, spacers, etc.).
D-4 Special Information .
a.
Identification of Usable On Codes for this manual is not applicable.
b.
Army unit maintenance personnel will extract the items which they require from Section II, 3rd or 4th
position of column 2 of the direct and general support RPSTL. Parts which are manufactured or assembled at
a higher level than that authorized to install the part are indicated by the use of higher level code in the source
column.
c.
Stockage Information. Army stockage is demand based in accordance with AR 710-2. Repair parts
listed in this publication represent those authorized for use at indicated maintenance levels and will be
requisitioned on an as-required basis until stockage is justified in accordance with AR 710-2.
D-5
