ARMY TM 8-6115-645-24
AIR FORCE TO 35C2-3-444-12
MARlNE CORPS TM 09244A/09245A-24/2
NOTES:
1. Dimensions shown are in inches.
2. Tolerances are 0.1 inch unless otherwise stated.
PROCEDURES:
1. Cut foam to dimensions shown.
2. Drill holes as shown.
3. Coat this edge using sealant (Item 17, Appendix C).
FIGURE D-16. Insulation, Baffle (P/N: 88-22612)
D-16