ARMY TM 9-6115-641-24P
AIR FORCE TO 35C2-3-456-14
NSN
5305-01-574-1467
NIIN
When using this column to locate an item, ignore the first four digits of the NSN. However, the complete NSN
should be used when ordering items by stock number.
(2) FIG. Column. This column lists the number of the figure where the item is identified/located. The figures are
in numerical order in Section II and Section III.
(3) ITEM Column. The item number identifies the item associated with the figure listed in the adjacent FIG.
column. This item is also identified by the NSN listed on the same line.
b. PART NUMBER INDEX. Part numbers in this index are listed in ascending alphanumeric sequence (i. e.,
vertical arrangement of letter and number combinations which place the first letter or digit of each group in order A
through Z, followed by the numbers 0 through 9, and each following letter or digit in like order).
(1) CAGEC Column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code used to
identify the manufacturer, distributor, or Government agency/activity that supplies the item.
(2) PART NUMBER Column. Indicates the primary number used by the manufacturer (individual, firm,
corporation, or Government activity), which controls the design and characteristics of the item by means of its
engineering drawings, specifications, standards, and inspection requirements to identify an item or range of
items.
(3) STOCK NUMBER Column. This column lists the NSN for the associated part number and manufacturer
identified in the PART NUMBER and FSCM columns to the left.
(4) FIG. Column. This column lists the number of the figure where the item is identified/located in Section II and
Section III.
(5) ITEM Column. The item number is that number assigned to the item as it appears in the figure referenced in
the adjacent figure number column.
c. FIGURE AND ITEM NUMBER INDEX.
(1) FIG. Column. This column lists the number of the figure where the item is identified/located in Section II and
Section Ill.
(2) ITEM Column. The item number is that number assigned to the item as it appears in the figure referenced in
the adjacent figure number column.
(3) STOCK NUMBER Column. This column lists the NSN for the item.
(4) CAGEC Column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code used to
identify the manufacturer, distributor, or Government agency/activity that supplies the item.
(5) PART NUMBER Column. Indicates the primary number used by the manufacturer (individual, firm,
corporation, or Government activity), which controls the design and characteristics of the item by means of its
engineering drawings, specifications, standards, and inspection requirements to identify an item or range of
items.
5. SPECIAL INFORMATION.
a. USABLE ON CODE. The usable on code appears in the lower left comer of the Description column heading. Usable
on codes are shown as "UOC:.." in the Description Column (justified left) on the last line of the applicable item
description/nomenclature. Uncoded items are applicable to all models. Identification of the usable on codes used in this
RPSTL are:
Code
Used On
EMH
5Kw, 60Hz Generator Set,
Model MEP-802A
ENY
5Kw, 400Hz Generator Set
Model MEP-812A
b. FABRICATION INSTRUCTIONS. Bulk materials required to manufacture items are listed in the Bulk Material
Functional Group of this RPSTL. Part numbers for bulks materials are also referenced in the description column of the
line entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items source coded to e
manufactured or fabricated are found in TM9-6115-641-24.
5
