ARMY TM 9-6115-639-23P
AIR FORCE TO 35C2-3-386-54
MARINE CORPS TM 10155A-23P/2A
(1)
CAGEC Column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric
code used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
(2)
PART NUMBER Column. Indicates the primary number used by the manufacturer (individual,
firm, corporation, or Government activity) , which controls the design and characteristics of the item by means of
its engineering drawings, specifications standards, and inspection requirements to identify an item or range of
items.
(3)
STOCK NUMBER Column. This column lists the NSN for the associated part number and
manufacturer identified in the PART NUMBER and FSCM columns to the left.
(4)
FIG. Column. This column lists the number of the figure where the item is identified/located in
Section II and III.
(5)
ITEM Column. The item number is that number assigned to the item as it appears in the figure
referenced in the adjacent figure number column.
5. SPECIAL INFORMATION. Use the following subparagraphs as applicable:
a.
Usable on Code. The usable on code appears in the lower left corner of the Description column heading.
Usable on codes are shown as “UOC: . . .” under the applicable item description/nomenclature. Uncoded items
are applicable to all models. Identification of the usable on codes used in the RPSTL are:
Code
Used On
LQQ
Generator Set, MEP 831A (60 Hz)
LQR
Generator Set, MEP 832A (400 Hz)
b.
Fabrication Instructions. Bulk materials required to manufacture items are listed in the description
column of the line item entry for the item to be manufactured/fabricated, see SECTION II of this RPSTL.
Detailed fabrication instructions for item source codes to be manufactured or fabricated are found in TM 9-6115-
639-13.
c. Assembly Instruction. Detailed assembly instructions for items source coded to be assembled from
component spare/repair parts are found in TM 9-6115-639-13. Items that make up the assembly are listed
immediately following the assembly item entry or reference is made to an applicable figure.
d.
Kits. Line item entries for repair parts kits appear throughout Section II.
e.
Associated Publications. The publication(s) listed below pertain to this generator set and its components:
Publication
Short Title
TM 9-6115-639-13
Maintenance Manual, Generator Set, MEP 831A and MEP 832A
6. HOW TO LOCATE REPAIR PARTS.
a.
When National Stock Number or Part Number is Not Known.
7
