ARMY TM 9-6115-639-13
AIR FORCE TO 35C2-3-386-51
MARINE CORPS TM 10155A-13/1
5-9. FUEL TANK MAINTENANCE - cont.
C. INSTALLATION.
1.
Install drain valve (1, Figure 5-3), elbow (7), and fitting (12) into fuel tank (14). Connect fuel drain line
(6) to elbow (7).
2.
Place fuel tank (14) into skid base and slide into place. Secure tank bracket (22) using screws (19),
lockwashers (20), and washers (21). Torque screws to 30 ft-lbs.
3.
Connect rubber hose (15) between fuel tank filler neck and fuel pocket (16). Tighten clamps (17, 18).
4.
Connect fuel return line (11) to fitting (12) and tighten hose clamp (13). Connect opposite end of line (to
fuel injector) to tee.
5.
Install bulkhead fitting (8), elbow (9), and nut (10) onto skid base. Connect drain hose (6) to fitting (8).
6.
Install hold down bracket (2) using jam nut (3), washer (4), and pin (5).
7.
Connect electrical wiring to fuel tank components.
8.
Install engine / alternator assembly (Para. 5-7). Install auxiliary fuel pump (Para. 4-51).
Figure 5-3. Fuel Tank
5-15
