APPENDIX C UNIT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST

Section III. TOOLS AND TEST EQUIPMENT REQUIREMENTS - TM-3-1040-280-20P_68

EXPLANATION OF COLUMNS (SECTION II AND III)

TM-3-1040-280-20P Mounting Kit Smoke Generator: M284 Manual
Page Navigation
66

TM 3-1040-280-20&P APPENDIX C UNIT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST Section I. INTRODUCTION C-1. SCOPE. This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnostic equipment (TMDE); and other special support equipment required for performance of unit maintenance of the mounting kit. It authorizes the requisitioning, issue, and disposition of spares, repair parts and special tools indicated by the Source, Maintenance and Recoverability (SMR) codes. C-2. GENERAL. In addition to Section I, Introduction, this Repair Parts and Special Tools List is divided into the following sections: a. Section II. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the performance of maintenance. The list also includes parts which must be removed for replacement of the authorized parts. Parts lists are composed of functional groups in ascending alphanumeric sequence, with the parts in each group listed in ascending figure and item number sequence. Bulk materials are listed by item name in FIG. BULK at the end of the section. Repair parts kits are listed separately in their own functional group within Section II. Repair parts for repairable special tools are also listed in this section. b. Section III. Special Tools List. Not applicable. c. Section IV. Cross-Reference Indexes. A list, in National item identification number (NIIN) sequence; of all National stock numbered items appearing in the listings, followed by a list in alphanumeric sequence of all part numbers appearing in the listings. National stock numbers and part numbers are cross-referenced to each illustration figure and item number appearance. This figure and item number index lists figure and item numbers in alphanumeric sequence and cross-references NSN, FSCM and part numbers. C-3. EXPLANATION OF COLUMNS (SECTIONS II AND III). a. ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration. b. SMR CODE (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-position code containing supply/requisitioning information, maintenance level authorization criteria, and disposition instruction, as shown in the following breakout: *Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenance tasks of the "Repair" function in a use/user environment in order to restore serviceability to a failed item. C-1

Privacy Statement
Press Release
Contact