TM 3-1040-280-20&P
Section V. M157 MAINTENANCE PROCEDURES
2-18.
INTRODUCTION . This section contains the
removal and installation procedures for the M157 smoke
generator set components which are mounted by this kit.
Refer to TM 3-1040-279-12&P for repair of smoke
generator set components.
2-19.
SMOKE GENERATOR SET COMPONENTS.
This task covers replacement of:
a.
M54 Smoke Generators
b.
Control Panel Assembly
c.
Fog Oil Pump Assembly
d.
Air Compressor Assembly
e.
Fog Oil Tank Assembly
a.
M54 Smoke Generators.
INITIAL SETUP
Tools
General Mechanic's Tool Kit
SC 5180-90-N26
Personnel Required
One mechanic
One assistant
1
REMOVAL
WARNING
Hot surfaces may be present if the
generator
has
recently
been
operated. Allow sufficient time for
cooling before handling or servicing.
NOTE
Removal and installation are the
same for both generators.
a.
Set circuit breaker CB1 on control panel to OFF.
b.
Disconnect cable and hose assemblies (1) from
cover assembly (2) on smoke generator (3).
2-45