TM 9-6115-647-14&P
CHAPTER 3
OPERATOR/CREW MAINTENANCE INSTRUCTIONS
Section I. CONSUMABLE OPERATING AND MAINTENANCE SUPPLIES
3-1. Consumable Supplies. Consumable supplies used in the maintenance and operation of the power unit
are listed in Table 3-1.
Table 3-1. Consumable Operating and Maintenance Supplies.
(1)
Component
application
(2)
National
stock number
(3)
Description
(4)
Qty
required
for initial
operation
(5)
Qty
required
8 hours
operation
(6)
Notes
General
Cleaning
6850-00-664-5685
Solvent, Drycleaning, PD-680
1 quart
As required
Power
Distribution
Unit and
Tailgate
9150-00-186-6681
Oil, Lubricating, OE/HDO-30
1 quart
As required
9150-00-402-4478
Oil, Lubricating, OEA
1 quart
As required
13222E9697
Adhesive, Silicone, Conductive
As required
Adhesive
As required
Section II. LUBRICATION INSTRUCTIONS
3-2. General. Detailed instructions for the lubrication of the major components of the power unit are contained
in the applicable Lubrication Orders (LO's). Refer to DA Pam 25-30 to ensure the latest editions of the LO's are
used.
3-3. Generator Lubrication. Refer to TM 5-6115-465-12 for generator set Lubrication Order.
3-4. Trailer Lubrication. There are no operator/crew lubrication requirements for the power unit trailer.
Section III. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
NOTE
The PMCS chart in this section contains all necessary Operator/Crew
preventive maintenance checks and services for this equipment.
3-1
