TM 5-6115-640-14&P
(3)
Install washer (7), nut (6), (tighten), flat washer (3), ground wire (5), flat washer (3), lockwasher (2) and
wingnut (1).
Tighten wingnut.
(4)
Route cabling through cable brackets.
(5)
Attach cables to generator set (refer to TM5-6115-615-12).
Section IX. SWITCH BOX SWITCH MAINTENANCE
4-20. SWITCH BOX SWITCH MAINTENANCE.
This Task covers
Testing
Initial Setup:
1.
Tools - General Mechanics Tool Kit (5180-00-177-7033)
- Multimeter AN/PSM-45 (6625-01-139-2512)
2.
Materials/Parts - None
WARNING
Ensure generator sets are shut down before performing any Maintenance on switch. Failure to
follow this precaution may result in injury or death by electrocution.
Test. Refer to paragraph 4-19a(1).
4-28
