DIRECT SUPPORT (FIELD) LEVEL MAINTENANCE
TACTICAL QUIET GENERATOR 100 kW, 50/60 Hz MEP-807A/PU-807A
FUEL TRANSFER PUMP/INJECTION ACTUATION PUMP, AND INJECTION ACTUTION PRESSURE
CONTROL VALVE MAINTENANCE
Tools and Special Tools
Shop Equipment, Automotive Maintenance,
Breakthrough cleaning solvent (WP 0120, Item 47)
Metal jewelry will conduct electricity. All jewelry can become entangled in generator set
components. Remove all jewelry when working on generator set. Failure to comply can cause
injury or death to personnel by electrocution.
DO NOT wear loose clothing when performing checks, services and maintenance. Failure to
comply can cause injury or death to personnel.
High voltage is produced when this generator set is in operation. Make sure unit is completely shut
down and free of any power source before attempting any repair or maintenance on the unit.
Failure to comply can cause injury or death to personnel.
High voltage is produced when the generator set is in operation. Never attempt to start or
maintain the generator set unless it is properly grounded. Failure to comply can cause injury or
death to personnel.
All fittings and openings must be capped or plugged immediately after opening to prevent
The injection actuation pressure control valve (IAPCV) is part of the fuel transfer pump. The
IAPCV can be replaced without further disassembly of the pump. DISASSEMBLY and
ASSEMBLY procedures should be followed for replacement of the IAPCV. These procedures
can be performed without removal of the fuel transfer pump.