INSTALLATION - Continued
6. Connect hose (Figure 1, Item 6) to bottom of surge tank (Figure 1, Item 4) and install hose clamp (Figure 1,
7. Pour coolant into COOLANT FILL and install fill cap (Figure 1, Item 1). If necessary, add coolant so level is
between HOT and COLD marks on coolant recovery system bottle.
Operating the generator set with any access door open exposes personnel to a high noise level.
Double hearing protection must be worn when operating or working near the generator set with
any access door open. Failure to comply can cause hearing damage to personnel.
8. Operate TQG and check for leaks.
10. Close right rear doors and right front door.
END OF TASK
END OF WORK PACKAGE