TM 9-6115-729-24
0023
ASSEMBLY
1. If necessary, use old foam damping sections as templates to cut new foam damping sections.
2. Install five foam damping sections.
3. Install duct (Figure 1, Item 12) and secure with eleven screws (Figure 1, Item 11).
4. Install two latches (1) and secure with eight screws (Figure 1, Item 10) and nuts (Figure 1, Item 9).
5. Install hinge (Figure 1, Item 8) and secure with eight screws (Figure 1, Item 7) and locknuts (Figure 1, Item 6).
END OF TASK
INSTALLATION
1. Install left rear door assembly (latch) and hinge (Figure 1, Item 2) and secure with eight lockwashers
(Figure 1, Item 5), washers (Figure 1, Item 4), and screws (Figure 1, Item 3).
2. Close left rear door assembly (latch) (Figure 1, Item 2) and secure by rotating two latches (Figure 1, Item 1).
END OF TASK
END OF WORK PACKAGE
0023-3/4 blank