ARMY TM 9-6115-672-24P
AIR FORCE TO 35C2-3-444-34
MARINE CORPS TM 09244A/09245A-24P/3
Repairable item. When beyond lower category repair capability, return to depot.
Condemnation and disposal of item not authorized below depot category.
Repairable item. Condemnation and disposal not authorized below specialized repair
Item requires special handling or condemnation procedures because of specific reasons
(e.g., precious metal content, high dollar value, critical material, or hazardous material).
Refer to appropriate manuals/directives for specific instructions.
CAGEC (Column (3)). The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code
which is used to identify the manufacturer, distributor, or government agency, etc., that supplies the item.
PART NUMBER (Column (4)). Indicates the primary number used by the manufacturer (individual,
company" firm, corporation, or Government activity), which controls the design and characteristics of the item by
means of its engineering drawings, specifications standards, and inspection requirements to identify an item or range
NOTE: When you use a NSN to requisition an item, the item you receive may have a different part number
from the part ordered.
DESCRIPTION AND USABLE ON CODE (UOC) (Column (5)). This column includes the following
The Federal item name and, when required, a minimum description to identify the item.
Items that are included in kits and sets are listed below the name of the kit or set.
Spare/repair parts that make up an assembled item are listed immediately following the assembled
item line entry.
Part numbers for bulk materials are referenced in this column in the line item entry for the item to be
When the item is not used with all serial numbers of the same model, the effective serial numbers are
shown on the last line(s) of the description (before UOC).
The UOC, when applicable (see paragraph 5, Special Information).
In the Special Tools List section, the Basis of Issue (BOI) appears as the last line(s) in the entry for
each special tool, special TMDE, and other special support equipment. When density of equipment supported
exceeds density spread indicated in the BOI, the total authorization is increased proportionately.
The statement "END OF FIGURE" appears just below the last item description in Column 5 for a
given figure in Section II.