ARMY TM 9-6115-672-14
AIR FORCE TO 35C2-3-444-32
MARINE CORPSTM 09244A/09245A-14
1. Dimensions are in inches.
2. Refer to TM 9-6115-672-24P for materials required.
1. Strip 0.125 inch of insulation from end of each switch (1) lead.
2. Crimp pin (2) on end of each lead.
3. Insert pins into housing (3) with lead A in position 1, lead B in position 2, lead C in position 3, and lead D in
4. Mark "P12" on strap (4), and install in position shown.
FIGURE G-34. SWITCH ASSEMBLY (P/N 88-22549)