ARMY TM 9-6115-671-14
AIR FORCE TO 35C2-3-446-32
MARINE CORPS TM 09249A/09246A-14
4-165
(4)
Inspect spacer (41) for cracks or other damage.
(5)
Inspect seals (46), supports (45), and stiffeners (44) for damage.
NOTE
If installing new seals, screw holes need to be match drilled at assembly.
(6)
Replace damaged parts.
(7)
Install fan, step c below.
c. Installation
(1)
Install seals (46, Figure 4-22), supports (45), stiffeners (44), screws (43), and locknuts (42) on
Shroud (19).
(2)
Position spacer (41), fan (40), and shroud (19) in generator set.
FIGURE 4-24. FAN BELT