ARMY TM 9-6115-670-14&P
6-3
Section II. GENERAL SUPPORT MAINTENANCE PROCEDURES
6.4. PUSH RODS.
This task covers: Replace
INITIAL SETUP
Tools
None
Equipment Conditions
Rocker arm removed (para 5.36.).
Materials/Parts
Push Rods
REPLACE
a. Remove push rods (1, Figure 6-1) from tappets by hand.
b. Install push rods (1) by hand.
CAUTION
When replacing push rods, ensure that their ends are
properly engaged with the grooves on the tappets.