TM 9-6115-669-13&P
f.
Remove tightening assembly (13) from pallet frame. The pallet frame is now sitting
unattached on the truck bed, so it can be lifted off.
CAUTION
Temporarily fasten or arrange PDU cable (16) so that it cannot be damaged
when frame is set down.
g.
Remove sling assembly (14) from the pallet frame. Suspend sling assembly on crane. Position
crane approximately centered over the three lifting lugs (15) on the pallet frame. One lifting
lug is located at the center of the frame, the other two on the sides.
Do not stand in the operating area of the crane. Do not walk
under the suspended load.
The lifting height of the crane must be sufficient to lift the
pallet frame easily off the truck bed.
Move the pallet frame slowly so it remains horizontal.
h. Engage the three cable hooks of the sling assembly in the three lifting lugs (15). Lift the pallet
frame and lower it onto a solid surface.
i.
Detach the sling assembly and attach it to the pallet frame.
4-57