Figure 4-23 Removing a Generator Set 150 kW from Pallet Frame using a Forklift.
Inspect the Generator Set 150 kW as instructed in TM 9-6115-666-13.
Do not damage PDU cables (10, figure 4-22) during set down of the
Generator Sets 150 kW.
Arrange PDU cable (10) so it will not be damaged when the Generator Set 150 kW is set down.
Make sure cable drums are in stowed position.
Remove sling assembly (2) from pallet frame (3). Suspend sling assembly from crane, and
position crane approximately over the center of the Generator Set 150 kW as shown in figure