TM 9-6115-664-13&P
4-50. OIL FILTER MAINTENANCE
This task covers removal, inspection, and installation
INITIAL SETUP
Tools:
Equipment Condition:
Oil Filter Wrench (4, App. B)
Engine Oil Drained (Para. 4-1)
A.
REMOVAL.
1.
Open oil filter access door by turning door latches.
2.
Using oil filter wrench, remove oil filter (1, Figure
4-40) from oil filter fitting (2). Discard oil filter.
B.
INSPECTION.
1.
Inspect oil filter fitting for damage. Inspect for
crossed, stripped, or flattened threads. Inspect
valve orifice for clogging and clean as required.
2.
Inspect area around oil cover for evidence of
leakage.
C.
INSTALLATION.
1.
Apply a light coat of engine oil to oil filter gasket to
ease filter installation. Install new oil filter (1, Figure
4-40) and hand tighten.
2.
Service engine oil (Para. 4-1). Inspect area around
oil filter for leakage and tighten as required.
3.
Close oil filter access door and lock using door
latches.
Figure 4-40. Oil Filter
4-117