TM 9-6115-646-14&P
(2)
Remove eight screws (1), sixteen flat washers (2), and eight nuts (3) securing plate (4) to trailer frame (5) and
front step support (6).
(3)
Lift plate (4) and spacer (7) off of trailer
NOTE
When replacing plate, remove and retain hammer bracket, clip, and associated hardware for installation
on new plate
(4)
Remove two screws (8), two flat washers (9), two nuts (10) and hammer bracket (11)
(5)
Remove screw (12), flat washer (13), nut (14) and clip (15)
Figure 4-9. Front Platform/Plate Replacement
b
Installation
NOTE
If Installing a new plate, reinstall hammer bracket and clip retained during removal procedure (steps 1 and
2) If reinstalling original plate, go to step 3
(1)
Position clip (15) on plate (4) and install screw (12), flat washer (13) and nut (14)
4-18