ARMY TM 9-6115-644-24
AIR FORCE TO 35C2-3-446-12
MARINE CORPS TM 09249A/09246A-24/2
NOTES:
1. Dimensions shown are in inches.
2. Refer to TM 9-6115-644-24P for materials
required.
PROCEDURES:
1.
2.
3.
4.
5.
6.
Cut wire (1) to length indicated.
Strip 0.75 inch of insulation sleeving from
each end of wire (1).
Mark insulation sleeving (2) with wire number
165A0, position on center of wire and shrink
to fit.
Mark insulation sleeving (4) with POSITIVE
and slide over each end of wire (1).
Crimp terminal (3) on each end of wire (1).
Position insulation sleeving (4) as shown and
shrink to fit.
FIGURE D-6. Cable Assembly, Battery (P/N: 88-22207)
D-6