ARMY TM 9-6115-642-24
AIR FORCE TO 35C2-3-455-12
MARINE CORPS TM 09247A/09248A-24/2
NOTES:
1. Refer to TM 9-6115642-24P for materials required.
PROCEDURES:
1. Strip 0.125 inch of insulation from end of each solenoid (1) lead.
2. Crimp pins (2) on end of each solenoid (1) lead.
3. Inser pins (2) into housing (3) with HOLD wire in position 1, PULL wire in position 2, and C wire in position 3.
4. Mark strap (4) with P14 and install in position shown.
FIGURE D-14. Solenoid Assembly, Fuel (P/N: 88-20482)
D-15