ARMY TM 9-6115-641-24
AIR FORCE TO 35C2-3-456-12
Install lower door sill (11) with bolts (7), washers (10), Iockwashers (9), and nuts (8).
Install center door post (6) with bolts (4) and nuts (5).
Install upper door sill (3) with bolts (1) and nuts (2).
Install load terminal board upper mounting bracket, paragraph 2-97-4.
Install air cleaner assembly, paragraph 2-67-4.
Install frequency adjust control cable assembly, paragraph 2-893.
Install NATO SLAVE RECEPTACLE, paragraph 2-13-3.
Install low oil pressure switch, paragraph 2-90-4.
Install oil pressure sender, paragraph 2-91-4 and oil line (3, Figure 225) at engine fitting.
Install DEAD CRANK switch, paragraph 2-96-4.
Install engine access doors, paragraph 2-15-4.
Install top housing panel, paragraph 2-17-4.
Install load terminal and storage box access doors, paragraph 2-15-4.
Install control box assembly, paragraph 2-21-4.
Connect negative battery cable and close all access doors.
Section X. MAINTENANCE OF CONTROL BOX ASSEMBLY
CONTROL BOX ASSEMBLY.
a. Shut down generator set.
b. Inspect control box for cracked and corroded panels, loose wires, or missing parts.