Figure 3-2. Fitted Cover Rolled Up for Removal.
b. Tarpaulin Support and Bow Assembly Replacement. (See figures 3-3 and 3-4.)
(a) Remove fitted cover (paragraph 3-11, a.(l)).
(b) Remove one screw (1, figure 3-3), one flat washer (2), one Iockwasher (3) and one
wing nut (4) securing tarpaulin support (5) to each of four bow assemblies (6) and
remove tarpaulin support.
(c) Remove two quick release pins (1, figure 3-4) securing each bow assembly (2) in
pocket (3) on trailer body (4). Lift each bow out of pocket and off trailer body.
(a) Lift each bow (2, figure 3-4) onto trailer, aline bow ends with pockets (3) in trailer body
(4) and drop bow in place. Secure each bow assembly with two quick release pins (1)
(b) Position tarpaulin support (5, figure 3-3) on bows (6) and secure tarpaulin support to
each bow with one screw (1), one flat washer (2), one Iockwasher (3) and one wing
(c) Install fitted cover on trailer (paragraph 3-11, a.(2)).