Item to be manufactured or fabricated at general support maintenance
Item to be manufactured or fabricated at depot maintenance level.
Item to be assembled at unit level.
Item to be assembled at direct support maintenance levels.
Item to be assembled at general supporl maintenance levels.
Item to be assembled at depot maintenance level.
Item is not procured or stocked because the requirements for the item will
result in the replacement of the next higher assembly.
Item is not procured or stocked. If not available through salvage, requisition.
Installation drawings, diagram, instruction sheet, field service drawing, that is
identified by manufacturers part number.
A support item that is not stocked. When required, item will be procured through
normal supply channels.
(2) Uniform maintenance codes applicable to all military services: GENERAL: Maintenance Codes are
assigned to indicate the levels of maintenance authorized to USE and REPAIR support items. The Maintenance
Codes are in the third and fourth position of the Uniform SMR Code Format.
(a) Use (third position): The Maintenance Code entered in the third position indicates the lowest level
maintenance level authorized to remove, replace, and use the support item. The Maintenance Code entered in
the third position indicates one of the following levels of maintenance.
Support item is removed, replaced, used at the unit level of maintenance
Support item is removed, replaced, used at direct support level.
Support item is removed, replaced, used at the general support level.
Support items that are removed, replaced, used at Depot only: Depot, Mobile
Depot and Specialized Repair Activity.
(b) Repair (fourth position): The maintenance code entered in the fourth position indicates whether the
item is to be repaired and identifies the lowest maintenance level with the capability to perform complete repair
(i.e., all authorized maintenance functions).